18th Century Swan Dish

Size = 2cm wide x 1.3cm high x .8cm deep

Supplied unaged - ready for tidying which will mean small nodules will need to be sanded or snapped off - this is super easy to do and takes just a minute or two.

This is part of a letter writing collection.
Used to slice open a letter.

2.8cm long

IT for 12th scale Sewing Machine

The painted sewing machine is an example of what the kit will look like when painted.

I was brought up with a sewing machine - my first one not too disimilar to this one. I was about 7 and living in Norfolk. I remember thinking what fun it was spinning the wheel as fast as I could only to end up crushing my finger in the spoke!

The sewing machine is very easy to assemble. It has a little spool winding addition which you glue to the front of the machine. I have to admit the machine is not exactly the same as the original. Any machinists will instantly recognise the flaws! If you want to add a spool of cotton thread to the top you would need to glue it on or you could drill and small hole in the metal and glue in a small pin.

The machine is cast with a little machine foot and needle - some of the images are missing them as I was a little heavy handed with my file.

Size:

Approx. 26mm high x 40mm long x 20mm deep

HOVIS bread tins

Small 1.4cm x 2cm x 1cm high

Large 2.7cm x 1.8cm x 1.3cm high

An iconic kitchen item designed for baking your bread. When the loaf is removed the bread would have had the impression of the word Hovis in the side of the bread!

The tins are created with the same font and design as the original with a small curled edge to the top of the tin to allow the bread to rise and flow over the edges.

When the item is supplied unpainted it will be supplied ready for tidying which will mean small nodules will need to be sanded or snapped off - this is super easy to do and takes just a minute or two.

Made from lead free pewter alloy.

A step away from my usual 18th century offerings is this rather lovely victorian camera. It comes in 4 sections but does not include a base. It would look wonderful in an office where maybe the occupier has a pile of old film and some photographs ready for framing or filing. I always feel that these types of item lend themselves to story telling. Not only can you indulge your love of all things mini but by adding such items to a room you begin to create a wonderful story. Who owns it? Why do they own it? What do sort of photography do they take? Ideas and imagination are endless and so much fun.

This little monkey wears a top hat and coat and is ready for painting. If you have a steady hand he would look great painted in some lovely muted tones of old french blue, earthy pink, old red and soft mustard. Ideal for the playroom or something a little quirky to add to your display cabinet of curios!

Unpainted resin
12th scale

SIZE (approx)

Small 24th scale or small 12th scale toy for playroom: Height 3cm or 1.25"

The kit is not painted.

Made from lead free pewter alloy and Aged by Mini Vintage

Unfinshed

12th scale

Wonderful ornate log basket with Putti

Supplied in kit form and made from Resin/Pewter

7cm wide x 3cm deep x 7cm high


Easy to assemble

Supplied unaged - ready for tidying which will mean small nodules will need to be sanded or snapped off - this is super easy to do and takes just a minute or two.

Pair of Fire Dogs

Pair of French firedogs. These are highly detailed and decorative metal cast 12th scale firedogs created to guard the fire. Each cherub faces inward and there is a left and a right in each pair. There is no longer a central length.


The fire dogs are unpainted and made from either resin or metal.


Cherubs firedogs are: 4.5cm high x 3cm wide x 1.25cm deep

Woodworking Drill in two parts

unaged

All drills supplied as a kit for gluing the two parts together

Made from lead free pewter alloy

12th scale

19th century Weather vane Kit. Choice of Aged or unfinished. Wall fitting but can also be fitted to a flat surface.

Sizes

Height from top of bird to flat disc 53mm

Flat disc diameter 35mm

19th century shopping till kit unfinished

Icons of the 19th century these magnificent shopping tills are simply wonderful. The miniature kit comes in 3 sections and is very easy to assemble. I do not supply any paper "price" tickets or clear glass for the non digital readout! The casting of the tiny little keys is incredibly complex and occassional one or two might need to be gently bent back into position.

Size

40mm tall x 30mm wide x 26mm deep

The kit is unassembled and comes unfinished in dull pewter.

The pewter can be polished or painted. If painting please apply a thin layer of metal primer. This will help the coat of paint adhere to the surface.

Corner wash basin bathroom sink

This item is supplied unpainted.
The item is made of resin with metal taps.

Approx 8cm high

Made from Resin

Supplied unaged - ready for tidying which will mean small nodules will need to be sanded or snapped off - this is super easy to do and takes just a minute or two.

A Carved STOOL WITH PUTTI 1860 unpainted

The design is supplied as a kit and unfinished. It is very easy to assemble. Insert for upholsery currently not supplied. Made from resin, Unfinished in kit form

Dimensions

Height 5cm x Length 5.5cm x Depth 5cm (floor to seat 3.7cm)

Short SCANDINAVIAN 19th century BENCH

This item is supplied as a kit and unpainted.
The item is made of mdf. It is a very simple to assemble kit. Supplied with easy to use instructions to show you how to construct the model and some tips to achieve a simple and effective build.
This item is not supplied with glue or paints.
Approx 10cm wide x 4cm deep x 7.7cm high

Waar we ook in het Verenigd Koninkrijk komen, we lijken altijd wel een model van een Windsor-stoel te vinden. Hier zijn er een paar van Mini Vintage, gebaseerd op echte blauwdrukken en ontwerpen. De stoelen zijn allemaal afzonderlijk geschilderd door Mini Vintage in verschillende tinten bruin. Gelieve in de opmerkingen aan te geven of u een donkerbruin of lichtbruin wilt bij uw aankoop.

Loop Chair : 85 x 48 x 45mm (hbd)
Elbow Stoel : 90 x 48 x 55mm (hbd)
Bowback Stoel : 82,5 x 55 x 45mm (hbd)
Boston Rocker : 91 x 50 x 60mm (hbd)
Settee Bench : 81 x 100 x 55mm (hbd)
Bowback en Wiegje : 81 x 105 x 50mm (hbd)

In Nederland worden klompen aan het einde van een werkdag in zulke rekken geplaatst, klaar voor de volgende werkdag.
Het rek is verkrijgbaar in 2 vormen (groot en klein). De Kleine heeft ruimte voor 4 paar klompen en is ongeveer 12 cm lang, de grote heeft ruimte voor 6 paar klompen en is ongeveer 15cm lang

Oude winkel uithangborden verkrijgbaar in verschillende vormen en uitvoeringen – deze zie je tegenwoordig niet vaak meer.
We hebben gekozen voor borden zoals je die vroeger bij echt oude winkels zag. Je kunt echter zelf tekst toevoegen aan de blanco borden, geheel naar wens.
De borden met één steun zijn 5 cm breed, en die met twee steunen zijn 9 cm breed. De borden zijn uitgesneden uit 2 mm MDF en zijn heel eenvoudig in elkaar te zetten.

Pretty Antique Provence Patterned edged jug

Ideal jug for loads of uses including holding a display of pretty flowers.

The pretty wavy edge and the embellishments on the border make it part of the Antique Provence tableware collection. The collection has an array of matching items all of which have been cast in metal and are as delicate and to scale as I could make them.

The price is for one

15mm high x 12mm diameter x 0.6mm thick

Pretty Antique Provence Patterned edged jug

Ideal jugs for loads of uses - the little one is a milk jug and ideal for anyone who wants to serve coffee with milk.
The pretty wavy edge and the embellishments on the border make it part of the Antique Provence tableware collection. The collection has an array of matching items all of which have been cast in metal and are as delicate and to scale as I could make them.

Free Standing Rectangular frames

Large 2.7cm x 5.3cm (oval 2cm x 3cm)
Mediuml 2.3cm x 4.5cm (oval 2.2cm x 2.5cm)

Supplied unpainted in an easy to assemble kit with the frame and the rear support seperate ready for gluing together.



These frames are so versatile and can be placed in almost any room in the house and set off a scene perfectly. They could contain small portraits or maybe silhouettes. Available in 4 sizes with possibly the small size being the most obvious choice if you are not sure which size to choose.



Supplied unaged - ready for tidying which will mean small nodules will need to be sanded or snapped off - this is super easy to do and takes just a minute or two.



Made from either metal or resin (metal shown in image).

The pretty wavy edge and the embellishments on the border make it part of the Antique Provence tableware collection. The collection has an array of matching items all of which have been cast in metal and are as delicate and to scale as I could make them.

Finishes:

Supplied unpainted and in their raw state (pewter metal alloy), the plates can either be polished or primed and then painted (using a spray paint will avoid any issues with "clumping" and "brush marks").

Size : Medium 24mm high to top of lid x 24mm diameter (widest part not including handles)

Food Scoop

3cm long x 0.9cm wide

Whether scooping for flour or grain this is the perfect sized scoop and ideal for use in a shop.

Made from metal and ready for paiting.

12th scale weight scales

Length 20mm (including dish) x 17mm diam of dish.

The little kitchen scale would be ideal in a messy kitchen table scheme. It comes in 4 sections, the large base, the star shaped dish supports, the dial face (not the dial) and the dish. To create a glass face try using doming resin. It's incredible stuff. Simply mix the two parts together 1:2 and then using a cocktail stick drip it onto the dial face...the beauty is that it remains raised like a dome...it's very realistic. You can buy button/dome resin online

Made from metal and ready for painting.

Home / KITCHEN / Pair Pretty Antique Provence salt and pepper pots unfinished

Pair Pretty Antique Provence salt and pepper pots unfinished



Size

Approx. 5mm tall



These beautiful little salt and pepper pots are part of the Antique Provence range and come unfinished in dull pewter.

The pewter can be polished or painted. If painting please apply a thin layer of metal primer. This will help the coat of paint adhere to the surface.

Sold in kit form these wonderful ceiling candelabras are stunning and would certainly make a statement in any 18th century or later room. In particular if you have a long thin room with a statementdining table then two at either end would be superb.

These are not electrified but the candle holders have been designed to accept a small candle bulb and therefore with a little bit of effort and time these could be electified.





Size

Large 76mm tall x 78mm wide

Deze prachtige theekast in antieke stijl is ontworpen en gemaakt door Mini Vintage. De kast kan voor allerlei doeleinden worden gebruikt, bijvoorbeeld voor kopjes en schoteltjes, borden en theepotten, of gewoon als kledingkast naast een bed. De kast is gemaakt van MDF, is niet geverfd en wordt als kit verkocht. De kastdeur en de twee lades kunnen worden geopend.
De afmetingen van de kast zijn 10 cm hoog, 7,5 cm breed en 3,5 cm diep.

12th scale Spiral staircase kit.

This simply beautiful spiral staircase is copied from a Polish original found in an abandoned house. This is the same staircase that we (Mini Vintage) have used in our Old Mill prototype. In the old Mill we use a 'Bottom Section' + 14 'Step Kits' as described below. This product as available on the Mini Vintage site is sold as 'one kit' suitable for use in the 'the Old Mill'. If you would like any different configuration then please order via www.alisondaviesminiatures.co.uk

Each step has stunning filligree and comes with a beautiful bannister post and rail.

The bottom step is slightly different to the other steps as it has a little base finial to finish it off.

The staircase is sold in "steps" with a bottom step option.

Each step measures approx. 15.25mm high x 37mm deep x 68mm wide

The Upright posts are approx. 81mm high with the handrail adding another 2mm to the height.



Bottom Step Kit contents:

1 x step

1 x Bottom hand rail (this is the longer handrail)

1 x Short top handrail

2 x Bannister posts

1 x Little floor flange

1 x Length 12" steel rod (for you to cut to size) (not shown)



Step kit contents:

1 x step

1 x Bannister post

1 x handrail section




Construction

This is a slightly harder kit to construct as it has to be supported during the build.

You will need superglue and a superglue activator (this simply sets the glue instantly and makes the whole job easier).

Always start with the bottom step but it can be constructed outside of the dolls house and then inserted when finished. Your only issue might be that you wont be able to secure the central rod into the floor and the ceiling. Ideally the floor would be added after the stairs are in position.

19th Century Radiator Kits ~ UNPAINTED 12th scale

This very pretty and realistic radiator is designed so that you can create any desired width. Each panel is about 0.8cm or 0.34" wide x 6.7cm or 2.64" high. You will need two end panels sold as a kit and then somple add the central sections. Width options are available in the dropdown menu or you can choose your own quanities.

The little tap and valves and joining pegs are all seperate making this a truly fun kit to assemble. It is easy too!

Unpainted metal - ideal for polishing
These are solid and quite heavy
12th scale
Build your own radiator to any length
Choose the end kit (the one with legs) then add the central sections


SIZES (are approx)

Height of radiator 6.7cm or 2.64"

Depth of radiator 1.6cm or 0.65"


Variations on width:

3 panel radiator 2.2cm or 0.86"

5 Panel radiator 4.3cm or 1.7"

The kit is not painted.

Unpainted Firescreen ready for image or upholstery French 19th Century

Unpainted metal
12th scale
Rear has recess for image or tapestry


SIZES (are approx)

Height: 8.5cm or 2.5"

Width: 7.5cm or 3"

Opening for print or tapestry 5.5cm or 2" wide x 5cm or 2" high



The kit is not painted.

12th scale bunch of keys

Length 20mm include the loop

A lovely bunch of old keys to hang off your door or hook - a really lovely addition to a scene.

Made from metal and ready for painting.

Simple pantry cabinet with gauze. This wonderful cupboard has been designed and created by us in our own Mini Vintage style .. we love it! The two doors can be opened to reveal two shelves, and the drawer at the bottom of the cabinet can also be opened.
The cabinet has been made in MDF and is about 15cm tall, 10cm wide and 4,4cm deep

Pretty Antique Provence Patterned edged Plates (2 sizes)



The pretty wavy edge and the embellishments on the border of the plate make it part of the Antique Provence tableware collection. The collection has an array of matching items all of which have been cast in metal and are as delicate and to scale as I could make them.

The price is for one plate - use the drop down menu to select quantity then add them to your basket.



Finishes:

Supplied unpainted and in their raw state (pewter metal alloy), the plates can either be polished or primed and then painted (using a spray paint will avoid any issues with "clumping" and "brush marks").

I have photographed them for you in both the unpainted state, a painted finish with a brown wash to age them and also a polished pewter finish. If you choose to paint then age them then try a pale cream, off white colour and then using raw or burnt umber (watered down) wipe them over to create a warm aged appearance.



Small 16mm diameter (0.6mm thick)

Medium 20mm diameter (0.7mm thick)

Large 25mm diameter (0.8mm thick)

Gorgeous late 18th century wall lantern with arm 12th scale kit

This item is supplied unpainted.
The item is made of resin and is not wired
If you wish to wire the lantern you will need to run a wire along the outside of the armand glue a support for the bulb placement.
Approx 9cm high x 2.9cm deepest part x base of lantern to bottom of the rod 4cm


Made from Resin



Supplied unaged - ready for tidying which will mean small nodules will need to be sanded or snapped off - this is super easy to do and takes just a minute or two.

Louis XVI Sofa, Armchair and Side Chair circa 1780

Supplied unfinished in kit form. Very easy to assemble the metal kit.


Measurements are approximate:

Side chair Without arms:

Height 9cm

Depth 5cm

Width 5cm



Armchair (with arms)

Height 9cm

Depth 5cm

Width 5cm



Upholstery

Supplied with each chair are mdf inserts which you can upholster

De Vintage dressoir een echt oudje.
Gevonden op internet en we mochten hen namaken.
Geen tweede op de wereld te vinden, behalve de onze dan in mini !

De dressoir is ongeveer 11 cm hoog, 14 cm breed en 3 cm diep en is van MDF gemaakt. Alle accessoires als gezien in de foto's zijn niet inbegrepen

18th Century Wine Cooler 12th scale Unpainted



This item is supplied unpainted

In two parts

Resin



Approx 3cm high


Made from Resin



Supplied unaged - ready for tidying which will mean small nodules will need to be sanded or snapped off - this is super easy to do and takes just a minute or two.

KIT 12th scale Large Kitchen Dresser supplied with metal handles unpainted

Kit and handles are unpainted

12th scale

The top and the bottom are NOT seperate

Made from MDF



SIZES

Bottom section: 26.3cm wide x 6.9cm deep x 7.7cm high
Top section: 26.9cm wide (at top) x 10cm high c 3.5cm deep
Top section shelf/recessed area: 6cm wide x 2.2cm deep x 2cm high
Total height approx. 17.7cm high x 6.9cm deep x 26.9cm wide


Ready to be assembled using woodglue or similar (glue not supplied). Attach handles with superglue. The kit is not painted.

Acorn hooks



This item is supplied unpainted.
The item is made of resin.
Size approx. 1.6 high x 1cm wide

Cat Hooks
This item is supplied unpainted.
The item is made of resin.

Approx 6cm long

Made from Resin



Supplied unaged - ready for tidying which will mean small nodules will need to be sanded or snapped off - this is super easy to do and takes just a minute or two.

12th scale French Canopy Bed Kit

The real lifesize 18th century French Canopy bed or "lit à baldaquin" can be found

in the "Musee-cognacq-jay". https://www.parismuseescollections.paris.fr/fr/musee-cognacq-jay/oeuvres/lit-a-la-polonaise#infos-principales.

The bed is an almost exact copy of the Museum piece. The instructions for my 12th scale version can be found in this listing. It is truly something that you can bring to life and certainly a statement item of furniture in any dollshouse but equally would look fabulous under a glass dome!



Size:

Height 20cm

External width 11.5cm

External length 16cm

Height to top of finials 13cm



As a contrast to my normal work I have created my sample in need of a make over...maybe the addition of some gold leaf and reupholstery is required? The bed would look fabulous guilded and draped in silk damask or maybe a pretty floral 18th century silk. The design lends itself to both opulent and Swedish Gustavian.



The bed is supplied as a kit and is relatively easy to construct but the upholstery has to be part of the process. The bed ends and the bottom of the bed all require covering in Fabric and will need to be done after it has been painted and before fully constructed.

Unlined 19th Century Bassinet

Supplied in kit form and made from Resin/Pewter

Total height 10cm
Width 5cm
Length approx. 8cm
Height from floor to top of basket 6.8cm


Easy to assemble



Supplied unaged - ready for tidying which will mean small nodules will need to be sanded or snapped off - this is super easy to do and takes just a minute or two.

Mum had these! And some of us will still own them although nonstick may have taken over!

The baking tray for small cakes is ideal if you are wanting to produce fairy cakes or maybe madeleines

3cm x 3cm

Sparrow Tureen unfinished

2cm tall (pot without the lid) x 2.5cm diameter at opening- the perfect size for a nice juicy casserole!

Adorned with flowers and leaves in the prettiest of patterns wth a little bird (possibly a sparrow) resting on a tiny branch on the lid. The sparrow is of course the handle for the lid and the sidehandles are twisted branches.

The tureens are amongst some of my more quirky and pretty items. The ideas for the Tureen can be simple to the most exciting....simply painting the Tureen and displaying it on the shelf or filling it with a wonderful rich gravy and meat with some of the juices burnt and cascading over the side of it.

The item is supplied unpainted.

12th scale Carpet Beater

20mm wide (18mm diam) x 60mm long

When your carpet needs to be dusted hang it up and give it a bash with this carpet beater.

Made from metal and ready for paiting.

Pretty Antique Provence Teapot



Size

Approx. 16mm tall x 17mm wide



This beautiful little teapot is part of the Antique Provence range and has a removable lid ready for some tea and comes unfinished in dull pewter.

The pewter can be polished or painted. If painting please apply a thin layer of metal primer. This will help the coat of paint adhere to the surface.

Pretty Antique Provence Patterned edged Gavy Boat





The pretty wavy edge and the embellishments on the border make it part of the Antique Provence tableware collection. The collection has an array of matching items all of which have been cast in metal and are as delicate and to scale as I could make them.

The price is for one - use the drop down menu to select quantity then add them to your basket.



Finishes:

Supplied unpainted and in their raw state (pewter metal alloy), the plates can either be polished or primed and then painted (using a spray paint will avoid any issues with "clumping" and "brush marks").

I have photographed them for you in both the unpainted state and a painted finish with a brown wash to age them. If you choose to paint then age them then try a pale cream as a main base colour and then using raw or burnt umber (watered down) wipe them over to create a warm aged appearance.



9mm high x Main body 9mm x 12mm x 0.6mm thick